Tag: spacer

SpaceRail Level 4 231-4 26000mm Glows In The Dark Fluorescent Luminous Model Kit

Posted on by chao's gonier

SpaceRail Level 4 231-4 26000mm Glows In The Dark Fluorescent Luminous Model Kit Description: Item: SpaceRail Model Kit Item NO.:231-4 Rail length: 26,000mm Assembled size: About 60*25*35CM Package size: 44 x 35 x 8cm Steel Balls: 4pcs Weight: About 1.8kg Difficulty level: Moderate Recommended Age: 15+ Note: Packaging may be changed in production batches. Please make sure that you don’t mind before ordering. Features: Great gift for special occasion for big boy / adult. It is really a magic decoration for your room once its assembled ! SPACERAIL is a suit-toy which could be assembled freely with its base, shaft and rail. The steel ball could run on the two lines sometimes snail and sometimes scour. It is for adults[…]

150Pcs/Lot M2.5 Brass Spacer + Screw + Nut Kits w/ Case for Raspberry Pi, Arduino, DIY Project

Posted on by my_rclife

Overview:Popular Size: As a reason of Raspberry pi hat design: GPIO Pin connection (Expansion board) will be about 11 mm high and the screw hole diameter is 2.75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspberry Pi 3 mode b / 2b /b+. General Brand Geekworm Model N/A Quantity 1 set Form Color M2.5 150Pcs Material Brass Specification English Manual / Spec No Download Link http://www.raspberrypiwiki.com/index.php/DIY_Screws_pack Dimensions & Weight Dimensions 0.79 in x 0.2 in x 0.2 in (2 cm x 0.5 cm x 0.5 cm) Weight 1.41 oz (40 g) Packing List 30 x M2.5 x 5mm Screws30 x M2.5 Nuts 15 x M2.5×5 Spacers15 x M2.5×5 +5mm Spacers15 x M2.5x11mm Spacers15 x[…]

ACCU “S” Lock Ratchet Lever / Bipod Lock for “S” Series Harris Bipod – Black

Posted on by my_rclife

Fits all the “S” Series (swivel) bipods, replaces the Tension Adjusting Knob for an easier and firmer Level Control.Allows Harris “S” series bipods to adjust the swivel tension quickly and easily by providing extra torque to adjust and lock the tension.Handle made of Zinc, with a powder coat finish and a pebbled feel.Other metallic components are made of steel.Ease of use even even when wearing gloves. 3/16″ black spacer prevents trimming down threaded stud on bipod. General Brand ACCU Form Color Black Material Aluminum alloy Quantity 1 piece Specification Gun Type Fits all the “S” Series (swivel) bipods,replaces the Tension Adjusting Knob for an easier and firmer Level Control Dimensions & Weight Dimensions 2.36 in x 1.18 in x 1.18 in[…]

Portable Straw Fresh Water Filter for Outdoor Activities

Posted on by my_rclife

Item specificsType: Pocket, Multi ToolsName : Straw Water FilterFiltration Pore Size : 0.05 micronFiltration Capacity : 1000 LitersMaterial : ABS , PP, carbon fiber, UF(medical grade)Water Flow : 200ml/minNW : 98 gType : Camping equipmentApplication : Running Fresh Water SourceSize : 35*180mm Bonus: Buy One Straw Water Filter Get One Water Bag(For Gravity Filtration) Free Product Description0.05 micron triple filtration versatile straw water filter turns running fresh water into clean   drinking water instantly without using chemical. It is effective against 99.9% of all kind of bacteria, microorganism, protozoa, also removes residual chlorine, unpleasant taste, odor and 99.9% heavy metals (Lead, Mercury, and Cadmium).It can be used to drink from threaded 28mm standard PET bottle, cup, water bag or directly from water[…]

220Pcs/Lot M3 Nickel Plating Brass Spacer, Screw, Nut Kit with Case

Posted on by my_rclife

Overview:This is a very useful DIY project for Geeks, not only for raspberry pi, but also compatible with arduino, orange pi or other board.The only things you should make sure is whether its size meets your need!Brass Hex Standoff/ Stainless Steel Screw / Nuts Assorted Kit;Screw thread: M3/(3mm);Male end thread length: 6mm;220Pcs/Lot. Come with the plastic box;Easy to install and durable to use; General Brand Geekworm Model M3 220Pcs/Lot Kit Quantity 1 set Form Color M3 220Pcs/Lot Kit Material Brass,Nickel,Iron Specification English Manual / Spec No Download Link http://www.raspberrypiwiki.com/index.php/DIY_Screws_pack Dimensions & Weight Dimensions 2.76 in x 1.97 in x 0.39 in (7 cm x 5 cm x 1 cm) Weight 9.52 oz (270 g) Packing List 40 x M3 x 6mm[…]

120Pcs/Lot M2.5 Brass Spacer+Screw+Nut Kits w/ Case for Raspberry Pi

Posted on by my_rclife

Overview:Popular Size: As a reason of Raspberry pi hat design: GPIO Pin connection (Expansion board) will be about 11 mm high and the screw hole diameter is 2.75 mm, this spacer & screw & nuts pack is a perfect installation tool for Raspberry Pi 3 mode b / 2b /b+. General Brand Geekworm Model N/A Quantity 1 set Form Color M2.5 Spacer+Screw+Nut Kits Material Brass+Iron Specification English Manual / Spec No Download Link http://www.raspberrypiwiki.com/index.php/DIY_Screws_pack Dimensions & Weight Dimensions 2.76 in x 1.97 in x 0.39 in (7 cm x 5 cm x 1 cm) Weight 3.88 oz (110 g) Packing List 30 x M2.5 x 5mm Screws30 x M2.5 Nuts 15 x M2.5×5 +5mm Spacers15 x M2.5x11mm Spacers15 x M2.5×11+6mm Spacers15[…]

OPEN-SMART 50N / 5kg FSR Sensor Module for Arduino

Posted on by my_rclife

FSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it is pressed.  The FSR is made of 2 layers separated by a spacer. The more one presses, the more of those Active Element dots touch the semiconductor and that makes the resistance go down.FSR sensor module consists of thin film pressure resistor and 10k ohm resistor in series, the greater the pressure in the sensing area, the higher the output voltage. Even if you touch it the with your fingers, the output will change and induction is very sensitive. Features:– Working Voltage VCC: 5.5 VDC(MAX)– Working Current: 1 mA(MAX)– Pressure Scale: 0-50N– Response time:  < 10ms– Recovery Time:  < 40ms– Sensing area diameter: 9mm– Total length[…]

Geekworm 20Pcs M3x20+6 Hex Nickel Plating Brass Spacer Pack

Posted on by my_rclife

Overview:This is a very useful DIY project for Geeks, not only for raspberry pi, but also compatible with arduino, orange pi or other board.The only things you should make sure is whether its size meets your need! General Brand Geekworm Model M3x20+6 Quantity 1 set Form Color M3x20+6 Material Brass+Nickel Specification English Manual / Spec No Download Link http://www.raspberrypiwiki.com/index.php/DIY_Screws_pack Dimensions & Weight Dimensions 1.97 in x 0.98 in x 0.39 in (5 cm x 2.5 cm x 1 cm) Weight 1.8 oz (51 g) Packing List 20 x Hex Brass Spacers (M3x20+6) All packages from DX.com are sent without DX logo or any information indicating DX.com. Due to package variations from suppliers, the product packaging customers receive may be different from[…]

Geekworm 20Pcs M3x5+6 Hex Nickel Plating Brass Spacer Pack

Posted on by my_rclife

Overview:This is a very useful DIY project for Geeks, not only for raspberry pi, but also compatible with arduino, orange pi or other board.The only things you should make sure is whether its size meets your need! General Brand Geekworm Model M3x5+6 Quantity 1 set Form Color M3x5+6 Material Brass+Nickel Specification English Manual / Spec No Download Link http://www.raspberrypiwiki.com/index.php/DIY_Screws_pack Dimensions & Weight Dimensions 1.97 in x 0.98 in x 0.39 in (5 cm x 2.5 cm x 1 cm) Weight 1.8 oz (51 g) Packing List 20 x Nickel Plating Brass Spacers (M3x5+6) All packages from DX.com are sent without DX logo or any information indicating DX.com. Due to package variations from suppliers, the product packaging customers receive may be different[…]

OPEN-SMART Round Film Force Sensitive Resistor 50N / 5kg FSR Sensor

Posted on by my_rclife

FSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it is pressed.  The FSR is made of 2 layers separated by a spacer. The more one presses, the more of those Active Element dots touch the semiconductor and that makes the resistance go down.Suggest you to connect it series with a 1k ohm resistor, so that you can detect the voltage so that you can calculate its resistance. Features:– No load resistance: >1000kOhm– Load resistance: <1kOhm @50N– Working Voltage VCC: 5.5 VDC(MAX)– Working Current: 5 mA(MAX)– Pressure Scale: 0-50N– Response time:  < 10ms– Recovery Time:  < 40ms– Sensing area diameter: 9mm– Total length: 40mm General Brand OPEN-SMART Model N/A Quantity 1 piece Form Color Black +[…]

Geekworm 20Pcs/Lot M3x20 20mm Hex Brass Spacer Kits for Raspberry Pi

Posted on by my_rclife

Overview:This is a very useful DIY project for Geeks, not only for raspberry pi, but also compatible with arduino, orange pi or other board.The only things you should make sure is whether its size meets your need!  General Brand Geekworm Model N/A Quantity 1 set Form Color M3x20 Material Brass Specification English Manual / Spec No Download Link http://www.raspberrypiwiki.com/index.php/DIY_Screws_pack Dimensions & Weight Dimensions 0.79 in x 0.2 in x 0.2 in (2 cm x 0.5 cm x 0.5 cm) Weight 1.41 oz (40 g) Packing List 20 x Brass Cylinders Spacers (M3x20) All packages from DX.com are sent without DX logo or any information indicating DX.com. Due to package variations from suppliers, the product packaging customers receive may be different from[…]

Slow Rebound Memory Foam Sleeping Lumbar Pillow Waist Neck Support Knee Cushion at Banggood

Posted on by my_rclife

Get it Now Features: 1. Made of polyurethane material, durable, soft and comfortable. 2. Great for home use or take it with you while traveling. 3. Can be used as a knee support pillow, lumbar support pillow, or leg spacer. 4. Cover invisible zipper, not to hurt the skin, to avoid scratches, can unpick and wash. 5. Two-layer design (memory foam on top of a highly resilient base foam) provides enhanced comfort while preventing the pillow from being compressed into “flat”.   Description: Item Type: Leg Pillow Material: Polyurethane Filling: Memory Foam Color: Light Yellow Size: (L) X (W) X (H) 49 X 18 X 10cm   Note: 1. Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. 2. Please understand that colors may exist[…]

Professional Cordless Split End And Damaged Hair Trimmer Beauty Styling Tools at Banggood

Posted on by my_rclife

Get it Now Features: * Snips the ends, Not the length. * Easier, faster & safer than scissors or blades. * Safely trims the tips of damaged, fried, broken, brittle hair and split ends in minutes. * Promotes a healthy looking sheen and a silky luxurious head of hair.   Description: Item Type: Hair Trimmer Color:Red/ Gray/ Blue Size: 68*35.2*168 Weight:1052g Voltage: 110-240V-60HZ Function: Safely Trims the damaged, fried, broken, brittle hair and split ends Package Included: 1 x Organizer Carrying Bag 1 x Styling Comb 2 x Sectional Clips 1 x Cleaning Brush 1 x 1/8’’Trim Spacer 1 x 1/4’’ Trim Spacer 1 x USB charger(cord only) 1 x Instruction Manual More Details: Get it Now Tags: esc, king, nut, spacer

Lumbar Pregnant Office Back Support Pillow Memory Foam Sleeping Pain Relief Cushion at Banggood

Posted on by my_rclife

Get it Now Features: -Made of high quality memory foam,machine-washable cover -Stable Triangle Design:"0" gap joint and evenly dispersed waist pressure,prevent strain of lumbar muscles,relieve lumbar discomfort,at the same time keep beautify the "S" lumbar curve -Supine side sleeping multi-azimuth caress the waist -Velvet Material, memory foam is antimicrobial and resistant to dust mites,machine washable outer velour cover,inner mesh liner increases comfort and breath-ability -Relieves strained back muscles and ligaments and relieves back pain while sleeping. Can be used as a knee support pillow,lumbar support pillow,or leg spacer -Cover invisible zipper, not to hurt the skin, to avoid scratches, can unpick and wash Description: Item Type: Back Support Pillow Material: Fabric:Cotton, Filling:Memory foam Color: Beige,Navy,Brown,Coffee Size(Length*Width): About 60*30cm, Height: About[…]

USB Electric Rechargeable Cordless Automatic Hair Split Trimmer Ends Damaged Dry Dyed Ratchet Hairs at Banggood

Posted on by my_rclife

Get it Now Features: 1. Easier, faster & safer than scissors or blades. 2. Trims the tips of damaged, fried, broken, brittle hair and split ends in minutes. 3. Snip the tip by approximately 1/8" to 1/4" (depending of the spacer type that you select). 4. Enable your hair longer, faster, more beautiful and healthier than ever before. Description: Item Type: End Hair Triming Color: Red Body Material: ABS Rated Voltage: 5V Size: As the picture shown Weight: App 570g Use for: Ends/ Damaged/ Dry/ Dyed/ Brittled Hairs   Package Included: 1 X Carrying Bag 1 X Styling Comb  2 X Sectioning Clip 1 X Cleaning Brush 1 X 1/4” Trim Spacer 1 X 1/8” Trim Spacer 1 X USB Cable[…]

COOCOO PJB002 Specialty Diecarved Featured Universal Complete Tattoo Accessory Kit Black at Banggood

Posted on by my_rclife

Get it Now Features: 1. Complied with the different needs of customers with complete accessories category. 2. Professional accurate accessories size.   Description: 1. Model: PJB002 2. Color: Mainly black 3. Size: 18 cm x 12 cm x 2.6 cm 4. Process: Die-casting, Carved 5. Packing Weight: 259.3 g Package Included: 1 x The Blue Box 1 x Secant Shrapnel 1 x Fight the Fog Shrapnel 2 x Contact Rod 2 x Phillips Screws 4 x Four Different Types of Iron 5 x SHCS 5 x Plastic Screws 5 x Pin Cushion 5 x Damping Ring 1 x Tabletting Plate 3 x Nut Set 1 x Wrench Set 5 x Rack Screws 5 x Spacer Small 5 x Gasket Large[…]

OCOOCOO PJB003 Locket Professional Diecasting Selected Accessory Kits for Any Tattoo Machine at Banggood

Posted on by my_rclife

Get it Now Features: 1. Complied with the different needs of customers with complete accessories category. 2. Professional accurate accessories size.   Description:  Model: PJB003 Dimensions: 13cm x 6.7cm x 2.2cm Weight: 170g Packing Dimensions: 14cm x 7cm x 3cm Packing Weight: 177.3 g Package Included: 1 x The white Box 1 x Secant Shrapnel 1 x Fight the Fog Fhrapnel 1 x Contact Rod 1 x Phillips Screws 4 x Four Different Types of Iron 4 x SHCS 4 x Plastic Screws 4 x Pin Cushion 4 x Damping Ring 1 x Tabletting Plate 1 x Nut Set 1 x Wrench Set 4 x Frame Screw 4 x Spacer Small 4 x Gasket Large 1 x Secant Shrapnel 1[…]